November 19, 2026 · Artistic Printing Co.
Coroplast vs foam board vs PVC vs aluminum signs: which should you choose?
A side-by-side comparison of corrugated plastic, foam board, PVC and aluminum composite signs: where each works, how long it lasts and the standard sizes and thicknesses.
Rigid signs cover a lot of ground: lobby signs, event easels, yard signs, parking signs and permanent building signs. Four materials handle almost all of them, and each one has a job it does best. We print on all four, and this is how we help customers choose.
Which rigid sign material should I choose?
Choose the material by where the sign lives and how long it needs to last. Indoor signs that are seen up close, such as lobby, easel and presentation signs, look best on foam board or PVC. Outdoor signs that only need to last through a campaign, an open house, an election or a seasonal promotion are usually printed on coroplast, because it is light, waterproof and inexpensive. Outdoor signs that need to stay up for years, such as parking, address, wayfinding and storefront signs, belong on aluminum composite. Two more questions refine the choice. Will the sign be moved or carried? Foam board and coroplast are the lightest. Will it be mounted with screws or hardware? PVC and aluminum composite hold fasteners best. If you are unsure, tell us where the sign will hang, how it will be mounted and how long it should last, and we will recommend the material.
When is coroplast (corrugated plastic) the right choice?
Coroplast is the right choice for lightweight outdoor signs that need to survive weather for a season, not for years.
- Best for: yard signs, real estate and open house signs, campaign signs, temporary directional and construction signs
- Common thickness: 4 mm, with 10 mm for larger, stiffer signs
- Common sizes: 18 x 24, 24 x 36 and 4 x 8 feet
- Durability: waterproof and weather resistant; typically lasts several months to about a year outside, depending on sun exposure
- Pros: low cost, very light, works with H-stakes slid into the flutes, can be printed on both sides
- Cons: visible flute texture up close, can bend in strong wind, fades and becomes brittle with long sun exposure
For H-stake yard signs, ask for the flutes to run vertically so the stake slides in from the bottom edge.
When is foam board the right choice?
Foam board is the right choice for indoor signs that need to look clean and stay light.
- Best for: event easel signs, welcome and seating signs, trade show and presentation boards, retail displays, temporary lobby signs
- Common thickness: 3/16 inch for most signs, 1/2 inch for larger or freestanding signs
- Common sizes: 18 x 24, 24 x 36 and 36 x 48 inches
- Durability: indoor use; the paper facing dents and absorbs moisture, and the board can warp in humidity or sun
- Pros: very light, smooth print surface, low cost, easy to carry and set on an easel
- Cons: not for outdoor use, corners dent easily, cannot hold screws well
Foam board is the usual pick for events, where a sign is used for a day or a week and then retired.
When should I use PVC or aluminum composite instead?
Use PVC for durable indoor signs and aluminum composite for long-term outdoor signs.
- PVC (expanded PVC board): best for office and lobby signs, menu boards, retail and wall signs; common in 3 mm and 6 mm; smooth, rigid and moisture resistant; holds screws and standoffs; can work outdoors under cover but can warp in direct heat and sun
- Aluminum composite (ACM): best for parking, address, wayfinding, storefront and building signs; common in 3 mm; two aluminum skins over a plastic core keep it flat, weatherproof and rigid; lasts for years outdoors, especially with a UV laminate; costs more than the other three
Both take drilled holes, standoffs, rivets and double-sided mounting tape, so they are the materials to choose when a sign will be permanently installed. For outdoor signs in direct sun, adding a UV-protective laminate over the print helps colors last longer.
How should I set up artwork for a rigid sign?
Set up the file at the exact finished size, add 0.125 inch bleed on every edge where color runs to the edge and keep text and logos at least 1 inch inside the edges on larger signs so nothing feels cramped. Leave extra margin where holes, grommets or standoffs will go, usually 1 inch from each corner. Images should be at least 150 DPI at full printed size for large signs viewed from a few feet away, and 300 DPI for smaller signs read up close. Use large type: as a rough guide, each inch of letter height is readable from about 10 feet away for a quick glance, so a sign read from the street needs letters several inches tall. High contrast, such as dark text on a light background, reads best outdoors. Send a print-ready PDF with fonts embedded, and tell us how the sign will be mounted so we can drill or add hardware before it leaves the shop.
Questions, answered in one line
- Can foam board signs be used outside?
- Only briefly. Foam board warps and its paper facing absorbs moisture, so it should stay indoors or under cover; use coroplast or aluminum composite outdoors.
- What size is a standard yard sign?
- The most common yard sign is 18 x 24 inches on 4 mm coroplast, mounted on a metal H-stake that slides into the flutes.
- What is aluminum composite material (ACM)?
- ACM is two thin aluminum sheets bonded to a solid plastic core, usually 3 mm thick in total, which makes it rigid, flat and weather resistant for long-term outdoor signs.
- Which sign material is cheapest?
- Coroplast and foam board are usually the lowest cost per sign, PVC is in the middle and aluminum composite costs the most, which is offset by its much longer life outdoors.
Need this printed in Los Angeles?
Artistic Printing Co. is a family-owned commercial printer at 5878 West Pico Boulevard with free pickup and delivery across LA.